Light-box signage
Light-box signage and illuminated panels.
Overview
A light box gives an even, bright face that reads at distance and works in low light. The visible quality depends on the diffuser and the spacing of the LED modules rather than on the brightness alone.
When to choose it
Light boxes and illuminated panels are chosen where a message must be clearly readable in poor light over a large area - wayfinding, retail graphics, transport, advertising. They give even, consistent brightness that individual illuminated letters cannot, and they work at sizes where other methods become impractical. They are the wrong answer where a softer, more architectural appearance is wanted, because a light box reads as a light box.
How it is made
The face material and the diffusion are chosen together, since the evenness of the light is what the whole product is judged on. Depth is set against the face size: a shallow box on a large face produces visible hotspots no matter how good the LEDs. Modules are laid out to a calculated spacing, and every unit is lit and inspected before it leaves the workshop. Access for replacing a failed module is designed in, along with the driver and its ventilation, and exterior units are specified with the IP rating the location demands.

Typical specifications
| Construction | Aluminium frame, acrylic or polycarbonate face, LED modules |
|---|---|
| Depth | 60-200 mm depending on face size and evenness required |
| Illumination | Edge-lit for slim boxes, backlit for large faces |
| Lead time | 2-4 weeks |
Typical applications
- Retail and service frontages
- Mall directories
- Menu and poster boxes
- Transport and station signage
- Illuminated wayfinding
What goes wrong on site
- Putting a shallow box behind a large face, which produces hotspots that cannot be corrected after manufacture.
- Sealing the unit with no access to the LEDs or driver, turning a five-minute replacement into a full rebuild.
- Ignoring ventilation, since heat is what actually shortens the life of the LEDs and the driver.
Before an overseas project starts
Face size and depth available
Send the dimensions and the depth the location allows. The two together determine whether even lighting is achievable.
Environment and IP rating
Interior, sheltered or fully exposed. It decides the housing, the seals and the driver specification.
Service access
Confirm who will service it and how. Access must be designed in, and the driver needs ventilation.
Questions buyers ask
How do you avoid bright spots on the face?
By matching LED pitch and diffuser grade to the face depth. This is calculated at design stage rather than corrected afterwards.
How is the graphic changed?
The face panel is removable and replaceable. We supply the front-opening or side-opening detail that suits your maintenance access.
How a project runs
- 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
- 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
- 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
- 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
- 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
- 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.
Packing, shipping and export
Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.
- Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
- Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
- Packing list keyed to the assembly drawings, so parts are identifiable on arrival
- Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
- Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
- Container loading plan supplied for large or irregular items, with a photo record of loading
Commercial terms
| Payment | Deposit on order, balance before shipment; T/T or as agreed in the contract |
|---|---|
| Currency | RMB or USD, invoiced in the agreed currency |
| Validity | Quotations held for 30 days unless stated otherwise |
| Scope basis | Material, labour, finishing, packing and freight quoted as separate lines |
| Changes | Variations priced in writing before the work proceeds |
| Warranty | Defects against workmanship and material failure within the agreed warranty period |
Quality control
- Dimensional and finish checks at each production milestone, not only at the end
- Dated progress photographs sent to the client throughout production
- Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
- Third-party inspection welcome; we will prepare the access and documentation needed
- Written handover with material and colour records, so later repairs can be matched
Other techniques in this capability
Gateway monument & entrance sign
Entrance monuments and gateway signage, built for weather and scale.
Read guide →All Signage & Wayfinding techniques · Full capability page · Complete technique library
Need this technique on your project?
Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.
Request a quoteHow export works