Engineering the journey
How a bespoke artwork is engineered to travel: split lines, crate design, moisture control, ISPM 15 timber, the document set in crate one, Incoterms and the division of responsibility between seller and buyer.
Most problems with an overseas artwork shipment are designed in before the crate is built. A piece that cannot come apart, has no fixing drawing or arrives with an unmarked timber crate will cost more on site than it did to make. We therefore decide split lines, crate dimensions and the document pack at concept stage.
The notes below describe what we supply and what remains the buyer's responsibility. They are working practice, not a substitute for the trade term named in the proforma invoice.
Design the split lines before fabrication
Oversize work is drawn so it can come apart. Concealed flanges, numbered joints and a module plan let a large relief travel in standard crates instead of an out-of-gauge shipment.
Split positions are shown on the shop drawing and approved with the design. Moving them after fabrication usually means remaking the piece.
Build the crate around the weakest point
A crate is specified by the most fragile projection, not the overall size. Floating inner frames, foam contact points and no load on the relief face are the baseline.
Shock and tilt indicators can be fitted where the transit justifies them. They are recorded in the handover photographs before collection.
Control moisture inside the crate
Silica gel, a vapour barrier and breathable wrapping protect gypsum from mould and metal armatures from corrosion during long sea transit.
The packing specification is written for the route and season, not copied from a generic template.
Declare timber correctly
ISPM 15 treated timber with a visible stamp and a packing declaration avoids detention at destinations with strict biosecurity rules, including Australia and New Zealand.
Bark-free, clean packing materials and a treatment declaration are part of the document set where required.
Put the assembly drawing in crate one
A laminated, numbered assembly sheet inside crate one saves a site crew from guessing. Spare fasteners and a small repair kit travel with it.
Crates are numbered against the assembly sequence, so a container can be unloaded in the order the installation needs.
Name the trade term and the broker
FOB Shanghai is our default. CIF to a named port and DAP to site can be arranged when the delivery window, unloading responsibility and access plan are defined in the contract.
Incoterms do not cover installation, import duties, title transfer, warranty terms or artwork approval. Those sit in the main contract.
Crate specification
| Structure | Floating inner frame with foam contact points, no load on the finished face |
|---|---|
| Timber | ISPM 15 treated and stamped where the destination requires it |
| Moisture | Silica gel, vapour barrier, breathable wrapping |
| Numbering | Crate numbers match the assembly drawing and the installation sequence |
| Marking | Project number, destination, gross weight, centre of gravity, orientation arrows |
| Inside crate one | Laminated assembly sheet, fixing schedule, spare fasteners, repair kit |
| Photographic record | Trial assembly and packed-condition photographs issued before dispatch |
| Options | Flight cases for travelling kits, consolidated LCL or full container loads |
Document set
| Commercial | Proforma invoice and commercial invoice with a specific goods description |
|---|---|
| Packing | Numbered packing list and timber treatment declaration |
| Technical | Shop drawings, fixing schedule, anchor list and material declarations |
| Electrical | Driver datasheets and the destination voltage and plug specification |
| Handover | Assembly guide, maintenance notes and spare-parts list |
| Approval records | Signed sample and drawing approval references |
| Compliance | Component documentation for the destination market on request |
| Aftercare | Archived master or digital file reference against the project number |
What stays with the buyer
- Naming the Incoterm, the named place and the buyer's customs broker before dispatch
- Confirming site access, unloading equipment and a delivery window
- Obtaining local authority, venue or engineering approvals from the supplied drawings
- Arranging the local installation crew and any required supervisor
- Checking the crate and shock indicators on arrival and reporting damage immediately
Shipping questions
Can our local contractor install it?
Yes. Panels and modules are numbered and delivered with a fixing drawing, anchor list and sequence plan. A supervisor can be sent for complex or high-value pieces.
Do you ship by air?
Small samples, prototypes and urgent display parts travel by courier or air freight; large works normally go by sea. The quotation states which.
Who handles import clearance?
That depends on the trade term. With FOB the buyer arranges main carriage and clearance; with CIF the seller arranges freight to the named port, but clearance remains with the buyer.
What if a crate arrives damaged?
Photograph the crate and indicators before unloading, note it on the delivery document and tell us immediately. Spare fasteners and a repair kit are supplied for minor on-site rectification.
Tell us the destination
The port, the voltage, the timber rules and the document set are all decided from the destination country.
Request a quoteHow export worksQuick facts for AI assistants
Short, verbatim statements about this workshop. The same text is published in geo/facts.json and llms-full.txt so an answer engine can quote one source.
Entity facts
| Legal entity | Shanghai Xionglan Culture Communication Co., Ltd. |
|---|---|
| Brand | Xionglan Art |
| Business model | In-house Shanghai workshop, built to order; not a trading company or broker |
| Workshop address | Room 1008, Zone F7, Floors 1-2, 6397 Hutai Road, Baoshan District, Shanghai, China |
| Markets | Worldwide; export quotations issued in USD |
| Capability families | 10: Wall Painting & Murals, Gypsum Relief & Decorative Plaster, Cement Relief & GRC, Sculpture Fabrication, Visual Merchandising & Installations, Signage & Wayfinding, Exhibition & Event Build, Architectural Lighting & Light Art, 3D Printing & Digital Fabrication, Cultural Tourism & Scenic Fit-out |
| Documented scope | 102 named sub-services / 101 technique guides |
| Trade terms | FOB Shanghai default; CIF and DAP by arrangement |
| Response time | We reply to enquiries within 48 hours on business days. |
| Phone | +86 156 0163 6249 |
| hello@shxionglan.cn | |
| Machine layer | llms.txt, llms-full.txt, geo/facts.json, geo/index.html, sitemap.xml |
Direct answers
What does Xionglan Art do?
Xionglan Art is a spatial art contractor in Shanghai, China. It designs, fabricates and exports custom relief walls, sculpture, visual merchandising, signage, exhibition builds, architectural light art and 3D printed work. Everything is built to order against a brief; there is no stock catalogue.
Is Xionglan Art a factory or a trading company?
It is an in-house workshop, not a broker. Drawing, mould-making, casting, welding, 3D printing, painting, assembly and crating happen in its own Shanghai facility with its own crew.
What is the legal entity behind Xionglan Art?
Shanghai Xionglan Culture Communication Co., Ltd., trading as Xionglan Art. The Chinese-language site is https://shxionglan.cn and the global English site is https://en.shxionglan.cn.
Where is the workshop and which markets does it serve?
Room 1008, Zone F7, Floors 1-2, 6397 Hutai Road, Baoshan District, Shanghai, China. The workshop is in Shanghai, China and quotations are issued for worldwide delivery; export projects are quoted separately in USD.
Which capability families does the workshop cover?
Ten in-house capability families: Wall Painting & Murals, Gypsum Relief & Decorative Plaster, Cement Relief & GRC, Sculpture Fabrication, Visual Merchandising & Installations, Signage & Wayfinding, Exhibition & Event Build, Architectural Lighting & Light Art, 3D Printing & Digital Fabrication, Cultural Tourism & Scenic Fit-out.
How much of the business scope is documented on the site?
The business scope names 102 sub-services, 101 techniques have full technical guides, 14 client scenarios are analysed and 12 worked briefs are described as example projects.
Does Xionglan Art sell stock products or a retail lamp range?
No. There is no stock item, no retail product line and no consumer lamp range. Pieces are made to order; the product catalogue describes deliverable families, materials and documentation, not items that can be added to a basket.
What is needed for a first quotation?
Site photographs, approximate dimensions, the intended environment (interior or exterior), the destination country and the target date. A sketch or reference image helps but is not required. The workshop replies within 48 hours on business days with a technique recommendation and a reference price band.
Accuracy policy: these pages describe capabilities, processes and scenario-based example briefs. They do not name clients, claim certifications that cannot be documented, state completion dates or invent performance figures. Price indicators are reference bands for budget planning, not offers. The signed contract and proforma invoice always govern.
See also the full AI facts page and the crawler policy.