Technique guide

Cast bronze sculpture

Cast bronze - the material for pieces intended to last a century.

Sculpture Fabrication

Cast bronze sculpture

Cast bronze - the material for pieces intended to last a century.

Overview

Lost-wax and sand casting produce bronze with fine detail, real weight and a patina that deepens over decades. It is expensive and slow, and chosen when permanence and prestige matter more than budget or speed.

When to choose it

Cast bronze is chosen where permanence and prestige matter and where the piece will be touched, weathered and expected to improve with age. It suits memorials, civic art, plaques, sculptural figures and anything expected to last generations. It is a serious commitment in cost and weight, so it makes sense where the piece is genuinely permanent. For temporary or lightweight work there are far more economical answers.

How it is made

The original is modelled in clay or produced digitally and then printed, and a mould is taken from it. Lost-wax casting reproduces detail with a fidelity no other method matches, and complex pieces are cast in sections and welded together. The patina is applied chemically and controlled by hand, which is why two castings of the same model can look quite different. Wax is applied as a protective layer, and the piece is designed with drainage and fixing points that will not stain the stone beneath it.

Sculpture Fabrication - technique reference

Typical specifications

ProcessLost-wax or sand casting, welded and chased
Wall thicknessTypically 4-8 mm cast shell over internal armature
PatinaHot-applied chemical patina, waxed or lacquered
Lead time8 weeks to several months

Typical applications

  • Memorials and monuments
  • Museum and gallery pieces
  • Civic and institutional art
  • Corporate commissions
  • Religious and ceremonial work

What goes wrong on site

  • Specifying bronze for a piece that will be replaced or relocated within a few years, where the material's cost buys nothing.
  • Sealing a bronze against weathering so completely that it cannot develop the patina the client actually wanted.
  • Forgetting the fixing and drainage design, so run-off stains the plinth or the paving below the piece.

Before an overseas project starts

Permanence and patina

Tell us whether the bronze should stay uniform or be allowed to weather. These are different specifications and they diverge over years.

Weight and foundation

Bronze is heavy. Confirm the foundation design and who is providing it, because the sculpture cannot be designed in isolation.

Security and fixing

For public pieces, tell us the theft risk so the fixing and the anchoring can be designed accordingly.

Common questions

Questions buyers ask

Will the patina change over time?

Yes, gradually, and that is part of the appeal. Waxing slows it; a lacquered finish holds the original tone far longer, at the cost of a slightly less natural surface.

How do you keep the weight manageable?

By casting a shell around a steel armature rather than solid, which keeps the outward appearance while reducing metal volume and cost.

Commercial & delivery

How a project runs

  1. 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
  2. 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
  3. 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
  4. 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
  5. 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
  6. 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.

Packing, shipping and export

Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.

  • Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
  • Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
  • Packing list keyed to the assembly drawings, so parts are identifiable on arrival
  • Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
  • Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
  • Container loading plan supplied for large or irregular items, with a photo record of loading

Commercial terms

PaymentDeposit on order, balance before shipment; T/T or as agreed in the contract
CurrencyRMB or USD, invoiced in the agreed currency
ValidityQuotations held for 30 days unless stated otherwise
Scope basisMaterial, labour, finishing, packing and freight quoted as separate lines
ChangesVariations priced in writing before the work proceeds
WarrantyDefects against workmanship and material failure within the agreed warranty period

Quality control

  • Dimensional and finish checks at each production milestone, not only at the end
  • Dated progress photographs sent to the client throughout production
  • Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
  • Third-party inspection welcome; we will prepare the access and documentation needed
  • Written handover with material and colour records, so later repairs can be matched
Related reading

Other techniques in this capability

FRP & resin sculpture

FRP and resin - complex shapes, light weight, controlled cost.

Read guide →

Coloured stainless sculpture

Coloured stainless - automotive-grade paint, powder coat or PVD titanium coating.

Read guide →

Mirror-polished stainless sculpture

Mirror-polished stainless steel - the reflective, high-impact public piece.

Read guide →

Brushed stainless sculpture

Brushed stainless - quieter than mirror, and far more forgiving.

Read guide →

Perforated stainless sculpture

Perforated and cut-metal sculpture - pattern as structure.

Read guide →

All Sculpture Fabrication techniques · Full capability page · Complete technique library

Need this technique on your project?

Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.

Request a quoteHow export works