Brushed stainless sculpture
Brushed stainless - quieter than mirror, and far more forgiving.
Overview
Brushed or satin stainless scatters light instead of reflecting it, which makes form and silhouette read clearly without a distracting reflection. It also hides fingerprints, dust and minor scratches far better than mirror.
When to choose it
Brushed stainless is the workhorse finish for exterior sculpture: it reads as metal rather than as mirror, holds its appearance through weather, and is far more forgiving of handling and minor damage than a polished surface. It suits entrances, campuses, corporate and civic art, and any piece where the form should read clearly without competing with its setting. It is not the finish for a piece that must almost vanish, which is what mirror is for.
How it is made
The form is fabricated from 304 or 316L plate over an internal armature, with the gauge chosen against the piece's size and wind loading rather than by habit. The brushed grain is applied consistently in one direction, since inconsistent grain is the thing the eye catches first. Welds are dressed and re-grained to match the surrounding surface, which is skilled work and should be budgeted for. For exterior pieces the armature is designed to drain and ventilate, because internal condensation is what actually destroys sculpture from the inside.

Typical specifications
| Material | 304 or 316L stainless steel |
|---|---|
| Finish | Satin/brushed, grain direction agreed |
| Thickness | 1.5-4 mm over internal armature |
| Sizes | From 1 m to over 12 m tall |
Typical applications
- Corporate and civic art
- Office and campus entrances
- Interior atrium pieces
- Memorial and commemorative work
- Retail interiors
What goes wrong on site
- Graining in inconsistent directions, which is invisible in a photograph and obvious in person.
- Leaving the armature sealed tight, so condensation collects inside and corrodes the structure within a few years.
- Under-specifying the plate gauge on a large piece, so the surface deflects visibly under wind loading.
Before an overseas project starts
Setting and climate
Coastal, urban or inland changes the alloy specification. Tell us where it will stand and how exposed it is.
Wind loading and engineering
For pieces over roughly four metres, tell us who is doing the structural design and what the site's wind criteria are.
Access for maintenance
Even a low-maintenance finish needs occasional cleaning. Confirm how the piece will be reached without scaffolding every time.
Questions buyers ask
Can the finish be repaired if it is scratched?
Usually yes. Brush grain runs a single direction, so a scratch can be blended out along the grain far more easily than on a mirror polish.
Is brushed cheaper than mirror?
Yes, typically - less polishing time. The difference is most noticeable on complex curved forms.
How a project runs
- 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
- 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
- 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
- 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
- 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
- 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.
Packing, shipping and export
Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.
- Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
- Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
- Packing list keyed to the assembly drawings, so parts are identifiable on arrival
- Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
- Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
- Container loading plan supplied for large or irregular items, with a photo record of loading
Commercial terms
| Payment | Deposit on order, balance before shipment; T/T or as agreed in the contract |
|---|---|
| Currency | RMB or USD, invoiced in the agreed currency |
| Validity | Quotations held for 30 days unless stated otherwise |
| Scope basis | Material, labour, finishing, packing and freight quoted as separate lines |
| Changes | Variations priced in writing before the work proceeds |
| Warranty | Defects against workmanship and material failure within the agreed warranty period |
Quality control
- Dimensional and finish checks at each production milestone, not only at the end
- Dated progress photographs sent to the client throughout production
- Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
- Third-party inspection welcome; we will prepare the access and documentation needed
- Written handover with material and colour records, so later repairs can be matched
Other techniques in this capability
Coloured stainless sculpture
Coloured stainless - automotive-grade paint, powder coat or PVD titanium coating.
Read guide →Mirror-polished stainless sculpture
Mirror-polished stainless steel - the reflective, high-impact public piece.
Read guide →Perforated stainless sculpture
Perforated and cut-metal sculpture - pattern as structure.
Read guide →All Sculpture Fabrication techniques · Full capability page · Complete technique library
Need this technique on your project?
Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.
Request a quoteHow export works