Technique guide

Cement / GRC sculpture

Cement and GRC sculpture - outdoor durability at a moderate cost.

Sculpture Fabrication

Cement / GRC sculpture

Cement and GRC sculpture - outdoor durability at a moderate cost.

Overview

Cement-based sculpture is cast or built up over an armature and finished to look like stone, bronze or plain concrete as required. It is the most cost-effective option for exterior pieces that must survive weather without ongoing care.

When to choose it

Cement and GRC sculpture is chosen where a piece should have the mass and weathered character of concrete, at a weight and cost that the structure can accept. It suits landscape pieces, planters, seating elements and exterior art in settings where concrete reads as appropriate rather than merely cheap. It is the wrong answer where the client expects the refinement of cast bronze or stone, because it will not reach that finish.

How it is made

The piece is designed with a shell thickness and internal reinforcement agreed from the start, so the weight stays within what the site can carry. Moulds are produced from the master, and the mix is batched to a recorded recipe for consistent colour and strength across a run. Units are cured under cover, because concrete cured in the open varies visibly piece to piece. Surface treatment - acid etching, washing, or a pigmented finish - is applied to achieve the intended texture, and the piece is detailed for drainage and for the freeze-thaw conditions it will meet.

Sculpture Fabrication - technique reference

Typical specifications

ConstructionSteel armature, mesh, layered cement or GRC shell
Wall thickness30-80 mm depending on size
FinishPigmented, stone-look, metal-effect or painted
SizesFrom 0.5 m to 10 m+

Typical applications

  • Outdoor plaza pieces
  • Landscape art
  • Themed rockwork figures
  • Park and garden sculpture
  • Fountain centrepieces

What goes wrong on site

  • Designing solid rather than shell sections, producing a piece too heavy to move or install economically.
  • Curing in the open air, which produces colour variation across a set that no amount of finishing will hide.
  • Ignoring freeze-thaw detailing; trapped water is what actually breaks concrete sculpture, not age.

Before an overseas project starts

Weight and foundation

Tell us the site's weight allowance and the foundation design. It shapes the shell specification more than the appearance does.

Colour and texture

Send a reference sample. Concrete colour varies with mix and curing, so an approved physical sample is essential.

Climate

Freeze-thaw climate requires air entrainment and drainage detailing. Tell us the location so it is specified in, not bolted on.

Common questions

Questions buyers ask

Does cement sculpture crack outdoors?

Movement is controlled with reinforcement and joints, and the surface is sealed. Hairline cracks can still appear over time and are treated as maintenance rather than failure.

How does the cost compare with stone?

Usually a fraction of carved stone for the same visual effect, especially on large pieces where weight and transport would otherwise dominate.

Commercial & delivery

How a project runs

  1. 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
  2. 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
  3. 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
  4. 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
  5. 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
  6. 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.

Packing, shipping and export

Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.

  • Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
  • Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
  • Packing list keyed to the assembly drawings, so parts are identifiable on arrival
  • Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
  • Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
  • Container loading plan supplied for large or irregular items, with a photo record of loading

Commercial terms

PaymentDeposit on order, balance before shipment; T/T or as agreed in the contract
CurrencyRMB or USD, invoiced in the agreed currency
ValidityQuotations held for 30 days unless stated otherwise
Scope basisMaterial, labour, finishing, packing and freight quoted as separate lines
ChangesVariations priced in writing before the work proceeds
WarrantyDefects against workmanship and material failure within the agreed warranty period

Quality control

  • Dimensional and finish checks at each production milestone, not only at the end
  • Dated progress photographs sent to the client throughout production
  • Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
  • Third-party inspection welcome; we will prepare the access and documentation needed
  • Written handover with material and colour records, so later repairs can be matched
Related reading

Other techniques in this capability

FRP & resin sculpture

FRP and resin - complex shapes, light weight, controlled cost.

Read guide →

Coloured stainless sculpture

Coloured stainless - automotive-grade paint, powder coat or PVD titanium coating.

Read guide →

Mirror-polished stainless sculpture

Mirror-polished stainless steel - the reflective, high-impact public piece.

Read guide →

Brushed stainless sculpture

Brushed stainless - quieter than mirror, and far more forgiving.

Read guide →

Perforated stainless sculpture

Perforated and cut-metal sculpture - pattern as structure.

Read guide →

All Sculpture Fabrication techniques · Full capability page · Complete technique library

Need this technique on your project?

Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.

Request a quoteHow export works