Technique guide

Cornices & Roman column mouldings

Repeatable profiles - cornices, columns, capitals and architraves.

Gypsum Relief & Decorative Plaster

Cornices & Roman column mouldings

Repeatable profiles - cornices, columns, capitals and architraves.

Overview

Profile work is where moulding pays off: one good master gives hundreds of identical metres. We match existing historic profiles where a building is being restored, and develop new ones from your drawings for new build.

When to choose it

Gypsum mouldings are the economical way to get classical or contemporary linear detail - dados, cornices, panel moulds, picture rails. They are chosen for interiors where proportion and line matter more than sculptural depth, and where the budget is better spent across a whole room than on one feature. They are not the right material for exterior work, wet rooms, or anywhere the detail needs to be carved rather than cast.

How it is made

Profiles are selected or matched, then cast in runs long enough to minimise joints and produce a continuous line. The substrate is checked for straightness before any moulding goes on, because a wavy wall will telegraph through every metre of profile. Adhesive is used in combination with mechanical fixing on long runs and on ceilings. Joints are cut at an angle rather than butted square, filled, and sanded flush so the run reads as one continuous section under raking light.

Gypsum Relief & Decorative Plaster - technique reference

Typical specifications

Typical sizeSection length 2-3 m, profiles made to drawing
Lead time2-5 weeks depending on number of profiles
MatchingSite survey and profile tracing for restoration work
FixingAdhesive plus mechanical fixings on long runs

Typical applications

  • Cornices and coving
  • Roman and Greek columns
  • Capitals and bases
  • Architraves and door surrounds
  • Skirting and picture rails

What goes wrong on site

  • Fixing mouldings to a wall that has not been checked for straightness, so the profile undulates along its length.
  • Butting joints square instead of mitring, which opens a visible line as the building moves seasonally.
  • Painting before the joint filler has fully dried, which shrinks back and prints the joint through the finish.

Before an overseas project starts

Profile list and lengths

Send the profiles required with the running metres for each, and note any existing moulding that must be matched.

Wall straightness

A laser or string line check tells us how much levelling is needed. It is far cheaper to find out before fixing.

Ceiling height and proportion

Moulding sizes are chosen against ceiling height, not preference. A cornice sized for a three-metre room swamps a two-point-six metre one.

Common questions

Questions buyers ask

Can you copy mouldings in an old building?

Yes. We take a physical profile gauge or a removable section of the original, and cast new masters from that trace.

How are long straight runs kept true?

Sections are aligned to a chalk line or laser over the full run before fixing, and joints are cut and filled so the profile reads continuously.

Commercial & delivery

How a project runs

  1. 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
  2. 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
  3. 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
  4. 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
  5. 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
  6. 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.

Packing, shipping and export

Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.

  • Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
  • Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
  • Packing list keyed to the assembly drawings, so parts are identifiable on arrival
  • Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
  • Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
  • Container loading plan supplied for large or irregular items, with a photo record of loading

Commercial terms

PaymentDeposit on order, balance before shipment; T/T or as agreed in the contract
CurrencyRMB or USD, invoiced in the agreed currency
ValidityQuotations held for 30 days unless stated otherwise
Scope basisMaterial, labour, finishing, packing and freight quoted as separate lines
ChangesVariations priced in writing before the work proceeds
WarrantyDefects against workmanship and material failure within the agreed warranty period

Quality control

  • Dimensional and finish checks at each production milestone, not only at the end
  • Dated progress photographs sent to the client throughout production
  • Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
  • Third-party inspection welcome; we will prepare the access and documentation needed
  • Written handover with material and colour records, so later repairs can be matched
Related reading

Other techniques in this capability

Feature-wall gypsum relief

One wall, fully designed - graphic relief at architectural scale.

Read guide →

Pure gypsum relief

Fine white plasterwork for classical and contemporary interiors.

Read guide →

French-style plasterwork

Ornate French and European detail - rosettes, panels and boiserie.

Read guide →

GRG sculpted ceiling

Sculpted ceilings produced off-site and assembled fast on-site.

Read guide →

GRG shaped relief

Free-form plaster shapes with the strength to span and curve.

Read guide →

All Gypsum Relief & Decorative Plaster techniques · Full capability page · Complete technique library

Need this technique on your project?

Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.

Request a quoteHow export works