Technique guide

Precast cement relief panels

Relief cast in the workshop, delivered as finished panels for fast fixing.

Cement Relief & GRC

Precast cement relief panels

Relief cast in the workshop, delivered as finished panels for fast fixing.

Overview

Precasting moves the work into controlled conditions: consistent mix, consistent cure and a cleaner site. Panels are cast from rubber or GRC moulds, finished in the workshop and then fixed on a setting-out grid.

When to choose it

Precast relief components are chosen when the same element repeats, when site time is expensive, or when the site cannot tolerate wet trades. Casting in a controlled workshop gives consistent colour, consistent curing and a flat back face for reliable fixing. It is the right answer for facades, repetitive panels and interiors with a tight programme. It is the wrong answer for a one-off organic form, where the mould cost dominates.

How it is made

Moulds are produced from the approved pattern, in a material chosen for the required number of casts and the depth of undercut. The mix is batched to a recorded recipe so colour and strength stay consistent across the whole run, and every unit is cured under cover rather than in the open. Each piece is marked with its position on a layout drawing, which makes site assembly straightforward and replacement possible years later. Fixing uses brackets designed for the unit's weight and the wall's build-up, not generic anchors.

Cement Relief & GRC - technique reference

Typical specifications

Typical sizePanel up to roughly 2.4 x 1.2 m, cast to order
Lead time3-6 weeks including moulds
WeightReduced with GRC for large formats
FixingMechanical fixings plus adhesive, on a surveyed grid

Typical applications

  • Repeatable facade panels
  • Interior feature walls
  • Repetitive decorative units
  • Retrofit cladding
  • Landscape walls

What goes wrong on site

  • Casting from an unapproved pattern, so the mould is made and then the design changes.
  • Curing units in the open, which produces colour variation across a run that shows badly on a facade.
  • Omitting piece marking, which turns site assembly into a puzzle and makes later replacement guesswork.

Before an overseas project starts

Repetition and quantity

Mould cost is amortised across the run. Tell us the quantity of each unit so we can advise candidly on whether casting pays.

Fixing substrate

Confirm the wall build-up and the load it can carry. Precast units are heavy and the fixing design follows from the substrate.

Colour and finish target

Send a sample or a reference photograph. We produce a physical sample unit for approval before the full run.

Common questions

Questions buyers ask

Do you need a mould made for my design?

Yes, and mould cost is a one-off. On repeated units the mould amortises quickly; on a single unique panel it can dominate the price, so we will tell you when site-sculpting is cheaper.

How are panel joints detailed?

Joints are set on the design grid and either left as an expressed shadow line or filled and finished flush, agreed at drawing stage.

Commercial & delivery

How a project runs

  1. 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
  2. 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
  3. 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
  4. 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
  5. 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
  6. 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.

Packing, shipping and export

Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.

  • Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
  • Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
  • Packing list keyed to the assembly drawings, so parts are identifiable on arrival
  • Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
  • Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
  • Container loading plan supplied for large or irregular items, with a photo record of loading

Commercial terms

PaymentDeposit on order, balance before shipment; T/T or as agreed in the contract
CurrencyRMB or USD, invoiced in the agreed currency
ValidityQuotations held for 30 days unless stated otherwise
Scope basisMaterial, labour, finishing, packing and freight quoted as separate lines
ChangesVariations priced in writing before the work proceeds
WarrantyDefects against workmanship and material failure within the agreed warranty period

Quality control

  • Dimensional and finish checks at each production milestone, not only at the end
  • Dated progress photographs sent to the client throughout production
  • Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
  • Third-party inspection welcome; we will prepare the access and documentation needed
  • Written handover with material and colour records, so later repairs can be matched
Related reading

Other techniques in this capability

Stone-look cement relief

Cement worked to read as natural stone at a fraction of the weight.

Read guide →

Bronze & rust-effect relief

Bronze, copper and rust effects cast into cement and plaster relief.

Read guide →

GRC components (columns / cornices / balustrades)

Glass-fibre reinforced cement for facades - columns, cornices and balustrades.

Read guide →

Landscape retaining-wall decoration

Retaining and boundary walls treated as designed landscape rather than engineering.

Read guide →

Water-feature & rockery cement forms

Water features, rockeries and artificial rockwork built in cement.

Read guide →

All Cement Relief & GRC techniques · Full capability page · Complete technique library

Need this technique on your project?

Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.

Request a quoteHow export works