GRC components (columns / cornices / balustrades)
Glass-fibre reinforced cement for facades - columns, cornices and balustrades.
Overview
GRC is a genuine cement product reinforced with glass fibre, which allows large, thin facade elements at roughly a quarter to a third of the weight of solid concrete. That usually removes the need for additional structural strengthening.
When to choose it
Glassfibre-reinforced concrete is chosen where large, thin, lightweight concrete elements are needed - facade screens, deep reveals, complex curved panels - that solid concrete could not deliver at acceptable weight. It is a facade and feature material rather than a bulk wall material, because the cost sits in the moulds and the mix design. It suits projects where a concrete aesthetic is required but the structure cannot take solid concrete.
How it is made
The element is designed as a panel with a defined thickness, reinforcement layout and fixing points, all coordinated with the structural engineer before casting. Moulds are produced from a master pattern and the GRC is sprayed to a controlled thickness so the fibre distribution is consistent. Units are cured, then trial-fitted in the workshop wherever the geometry is complex. On site they are set out from a surveyed grid and fixed on brackets that allow the movement a facade inevitably experiences.

Typical specifications
| Typical size | Elements up to several metres, produced in sections |
|---|---|
| Weight | Approximately 25-35% of equivalent solid concrete |
| Lead time | 4-8 weeks from approved shop drawings |
| Standards | Fibre content and strength verified by test certificates |
Typical applications
- Facade columns and pilasters
- Cornices and string courses
- Balustrades and parapets
- Window surrounds
- Decorative facade screens
What goes wrong on site
- Designing the panel as if it were solid concrete, ignoring the thickness and fixing constraints GRC actually imposes.
- Treating GRC as a bulk cladding for large areas, where the mould cost makes it uneconomic compared with alternatives.
- Fixing rigidly without allowance for thermal movement, which cracks panels at the fixings within a season or two.
Before an overseas project starts
Structural coordination
GRC elements need fixing points agreed with the engineer. Confirm who is coordinating that, because it is not a decision the fabricator can make alone.
Geometry and repeat
Send the panel geometry and the quantity per type. Complex geometry is achievable; complex geometry repeated many times is where the cost sits.
Finish and colour
GRC can be pigmented, acid-etched or coated. Send the intended finish so the mix and the mould surface are set up correctly.
Questions buyers ask
How is a large GRC element fixed to a facade?
With engineered brackets on a surveyed grid, using the setting-out drawings to align to the building. Fixing design is coordinated with the main contractor.
Can GRC match an existing stone or render facade?
Yes. Colour and texture are matched from a physical sample, and we produce a sample panel for approval before the production run.
How a project runs
- 1. EnquirySend photographs, drawings or a 3D file with approximate dimensions and your target date. A short written brief is enough to start.
- 2. Technique recommendationWe come back with the technique that fits your substrate, viewing distance and budget, plus the alternatives we rejected and why.
- 3. Sample and quotationA colour or material sample where relevant, and a costed quotation split into material, labour, finishing, packing and freight.
- 4. ProductionWork proceeds in our own workshop with dated progress photographs at agreed milestones.
- 5. Packing and shippingCrated and marked to your forwarder's requirements, with the full export document set prepared in advance.
- 6. Installation or handoverOur own crew installs on site, or we supply a fixing method statement and supervise your contractor locally.
Packing, shipping and export
Overseas projects are normal work for us, and packing is designed for the journey rather than added afterwards. Components are numbered against a packing list so assembly on site follows the drawings.
- Export plywood crates with foam blocking, desiccant and heat-treated (ISPM 15) timber
- Each crate marked with the shipping mark, crate number, gross and net weight and handling symbols
- Packing list keyed to the assembly drawings, so parts are identifiable on arrival
- Full document set: commercial invoice, packing list, certificate of origin and fumigation certificate
- Delivery on EXW, FOB, CIF or DDP terms depending on your forwarder arrangements
- Container loading plan supplied for large or irregular items, with a photo record of loading
Commercial terms
| Payment | Deposit on order, balance before shipment; T/T or as agreed in the contract |
|---|---|
| Currency | RMB or USD, invoiced in the agreed currency |
| Validity | Quotations held for 30 days unless stated otherwise |
| Scope basis | Material, labour, finishing, packing and freight quoted as separate lines |
| Changes | Variations priced in writing before the work proceeds |
| Warranty | Defects against workmanship and material failure within the agreed warranty period |
Quality control
- Dimensional and finish checks at each production milestone, not only at the end
- Dated progress photographs sent to the client throughout production
- Pre-shipment assembly trial for multi-part pieces, so site fit is verified before dispatch
- Third-party inspection welcome; we will prepare the access and documentation needed
- Written handover with material and colour records, so later repairs can be matched
Other techniques in this capability
Stone-look cement relief
Cement worked to read as natural stone at a fraction of the weight.
Read guide →Bronze & rust-effect relief
Bronze, copper and rust effects cast into cement and plaster relief.
Read guide →Landscape retaining-wall decoration
Retaining and boundary walls treated as designed landscape rather than engineering.
Read guide →Water-feature & rockery cement forms
Water features, rockeries and artificial rockwork built in cement.
Read guide →Micro-cement texture wall
Micro-cement surfaces with the seamless look of poured concrete.
Read guide →All Cement Relief & GRC techniques · Full capability page · Complete technique library
Need this technique on your project?
Send the brief, approximate dimensions and destination. We will come back with a technique recommendation and a reference price band.
Request a quoteHow export works