Buyer Q&A

Choosing materials and formats

Material and process choices for walls, relief, sculpture and photo-worthy features, with the trade-offs that actually matter on site. Twelve selection questions.

About the figures on this page. Prices on this page are reference ranges for projects delivered inside China, shown in CNY. Export projects are quoted individually in USD after the brief, site conditions, freight and installation scope are confirmed. All ranges are indicative, not a fixed rate, and no outcome or exposure is promised.

12 questions

Choosing materials and formats

Material and process choices for walls, relief, sculpture and photo-worthy features, with the trade-offs that actually matter on site. Twelve selection questions.

Gypsum relief or cement relief: which should I choose?

Indoors with a need for fine, crisp detail, choose gypsum; outdoors, for durability or large scale, choose cement or GRC. Gypsum is white, sharp and easy to repair but dislikes moisture and impact; cement is strong and weather-resistant but reads coarser. In a damp interior - beside a pool or kitchen, or in a basement - gypsum can mould, so cement or microcement is safer at the cost of finesse.

Hand-painted mural or UV print?

Choose hand-painting for texture, depth and long service life; choose printing for speed, lower cost and very large repeated graphics. Painting has visible brushwork and can be retouched locally, but its programme grows with area; printing is flat and the applied medium can lift with humidity cycles. A common hybrid prints or coats the broad background and hand-paints the focal image, balancing cost and quality.

What is the difference between traditional relief and 3D-printed relief?

Traditional relief in gypsum, cement or GRC is shaped by hand or cast from a mould, so it suits large areas, real depth and a sense of mass, and is structurally robust. Printed relief is built layer by layer from a digital model, excelling at complex geometry, piercing and precise replication, and is ideal for small pieces, fine components and master patterns. For very large work, conventional fabrication is usually more economical.

What works well on restaurant walls?

Start with two questions: where do guests photograph, and how washable must the surface be? The wall facing the entrance and the seating backdrop are prime positions for a themed mural or local relief. Walls near the kitchen need washable, grease-resistant finishes. Warm palettes, appetite-friendly imagery and a brand or regional story generally work better than cold colour blocks or high-gloss surfaces.

What makes a good office reception feature wall?

A combination of dimensional lettering, a material finish (timber veneer, microcement, metal or gypsum relief) and wall-washing light reads more considered than a flat printed logo. Keep the wall itself to the brand name and one positioning line; move company history, timeline and awards to corridor or meeting-area walls so the message unfolds as people move through the space. Lighting is normally a separate line item, but a feature wall without it loses most of its effect after dark.

Which materials are safest for a kindergarten wall?

Prioritise low emissions, impact safety and washability. Use materials with test reports and minimal odour, surfaces that can be wiped clean, and rounded corners with no sharp projections. Anything within a child's reach needs pull-resistant fixings and no small detachable parts. Water-based acrylic murals with a water-based clear coat, soft padding and washable panels are common choices; ventilate for a few days after completion.

What can be done with only ten square metres of wall?

Ten square metres is enough for one complete focal element: a full themed mural, a detailed relief panel, or a compact photo spot built against the wall. The key is focus - one clear subject and one visual centre. Small walls become busy when too many elements are added, and busyness reads as cheaper rather than richer.

Stainless steel or FRP for a sculpture?

For long-term outdoor use with a material presence, choose stainless steel; for interiors, limited budgets or lightweight pieces, choose FRP. Steel weathers well, takes mirror, brushed and pierced finishes and suits plazas and entrances, but is costly, heavy and demands a real foundation. FRP is light, economical, easy to colour and capable of large cartoon forms, but chalks and yellows outdoors after a few seasons. Include eventual refurbishment in the comparison.

How do I create a spot people want to photograph?

Design backwards from where a person stands and how a phone frames the shot. Most failed photo spots are too full to stand in, too dark, lack a focal point, or have no link to the brand. Leave a clean standing area, one clear focal element, and light it well - a mural, a dimensional object or a display set can all work. Choose a position directly opposite the entrance or on a compulsory circulation path. We do not promise reach or exposure; the design raises the likelihood of being photographed.

How can pipes and wall defects be handled?

Treat them as a design opportunity. Pipes can be encased in gypsum or cement relief and turned into a feature; defects can be absorbed into a full-wall composition; or a decorative panel or perforated board can screen the area. But if the cause is water ingress, hollow plaster or cracking, fix the source first - covering it lets the problem continue underneath and destroys the new finish within months. Where pipes need servicing, use demountable panels or leave access hatches.

I have no idea what to choose - where do I start?

You do not need to understand the processes. Describe four things: what kind of space it is, roughly how large, your budget range, and the feeling you want (refined, warm, attention-grabbing, cultural). That is enough to narrow to two or three clear directions. Then add one more line - what worries you most (cracking, fading, programme, price changes, cleaning) - and the recommendation can address it directly. No drawing is needed at this stage.

Which materials last outdoors?

UV, rain and thermal cycling drive outdoor failure. In rough order of durability: stainless steel, stone and cement/GRC lead; weather-grade coatings with an anti-UV clear coat follow; FRP and general resins need caution; ordinary gypsum is not recommended outdoors. Exterior murals need weather-grade acrylic or polyurethane plus a clear UV topcoat, sculptures need corrosion protection at welds and foundations, and relief should be cement or GRC. A well-built exterior mural typically holds colour for three to five years before local retouching.

Also in the library

Three ways into the material

Technique articles explain how the work is made. Buyer insights explain how a project is specified, approved and accepted. The Q&A section answers the questions that come up before a quotation is agreed.

Technical knowledge base

22 in-depth articles on materials, processes, installation QA and applications.

Open section →

Buyer insights

7 long-form guides on contracts, site access, acceptance, briefing and aftercare.

Open section →

Buyer Q&A

96 practical answers grouped into 8 themes.

Open section →

Tell us what you are building

Send photos, dimensions, the destination country and your target date. You will get a technique recommendation, a reference price band and a production schedule - no obligation.

Request a quoteHow export works