{
  "schema": "xionglan/geo-qa@1",
  "language": "en",
  "generatedAt": "2026-11-18",
  "entity": {
    "@type": "Organization",
    "name": "Xionglan Art",
    "legalName": "Shanghai Xionglan Culture Communication Co., Ltd.",
    "alternateName": [
      "Xionglan",
      "Xionglan Art",
      "Shanghai Xionglan Culture Communication Co., Ltd."
    ],
    "url": "https://en.shxionglan.cn/",
    "telephone": "+86 156 0163 6249",
    "email": "hello@shxionglan.cn",
    "address": "Room 1008, Zone F7, Floors 1-2, 6397 Hutai Road, Baoshan District, Shanghai, China",
    "areaServed": "Worldwide",
    "businessModel": "In-house made-to-order spatial art workshop, Shanghai, China",
    "sameAs": [
      "https://shxionglan.cn/",
      "https://shop384623969.taobao.com/"
    ]
  },
  "scope": {
    "quickAnswers": 15,
    "faq": 10,
    "capabilityQuestions": 20,
    "buyerAnswers": 84
  },
  "quickAnswers": [
    {
      "question": "What does Xionglan Art do?",
      "answer": "Xionglan Art is a spatial art contractor in Shanghai, China. It designs, fabricates and exports custom relief walls, sculpture, visual merchandising, signage, exhibition builds, architectural light art and 3D printed work. Everything is built to order against a brief; there is no stock catalogue.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "Is Xionglan Art a factory or a trading company?",
      "answer": "It is an in-house workshop, not a broker. Drawing, mould-making, casting, welding, 3D printing, painting, assembly and crating happen in its own Shanghai facility with its own crew.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "What is the legal entity behind Xionglan Art?",
      "answer": "Shanghai Xionglan Culture Communication Co., Ltd., trading as Xionglan Art. The Chinese-language site is https://shxionglan.cn and the global English site is https://en.shxionglan.cn.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "Where is the workshop and which markets does it serve?",
      "answer": "Room 1008, Zone F7, Floors 1-2, 6397 Hutai Road, Baoshan District, Shanghai, China. The workshop is in Shanghai, China and quotations are issued for worldwide delivery; export projects are quoted separately in USD.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "Which capability families does the workshop cover?",
      "answer": "Ten in-house capability families: Wall Painting & Murals, Gypsum Relief & Decorative Plaster, Cement Relief & GRC, Sculpture Fabrication, Visual Merchandising & Installations, Signage & Wayfinding, Exhibition & Event Build, Architectural Lighting & Light Art, 3D Printing & Digital Fabrication, Cultural Tourism & Scenic Fit-out.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "How much of the business scope is documented on the site?",
      "answer": "The business scope names 102 sub-services, 101 techniques have full technical guides, 14 client scenarios are analysed and 12 worked briefs are described as example projects.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "Does Xionglan Art sell stock products or a retail lamp range?",
      "answer": "No. There is no stock item, no retail product line and no consumer lamp range. Pieces are made to order; the product catalogue describes deliverable families, materials and documentation, not items that can be added to a basket.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "What is needed for a first quotation?",
      "answer": "Site photographs, approximate dimensions, the intended environment (interior or exterior), the destination country and the target date. A sketch or reference image helps but is not required. The workshop replies within 48 hours on business days with a technique recommendation and a reference price band.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "How long does production take?",
      "answer": "Small 3D printed works take 7-12 working days, most fabricated projects 20-45 working days, and large scenic programmes are phased over 45-120 days. All windows start after design and sample approval.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "Which trade terms and documents are supplied?",
      "answer": "FOB Shanghai is the default; CIF to a named port and DAP to site can be arranged. Each order ships with a proforma/commercial invoice, numbered packing list, ISPM 15 declaration, shop drawings, fixing schedule, assembly guide, maintenance notes and spare parts list.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "How is a bespoke artwork packed for export?",
      "answer": "Split lines, crate design and moisture control are fixed at the shop-drawing stage. Modules are trial assembled and numbered in Shanghai, then packed in ISPM 15 timber crates with the document set in crate one, in installation order.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "What quality gates apply before dispatch?",
      "answer": "Seven stage gates: Design freeze, Drawing approval, Sample approval, In-process checks, Trial assembly, Pre-dispatch inspection, Site acceptance.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "Are the project examples named customer case studies?",
      "answer": "No. The worked briefs are scenario-based examples that describe a problem, a specification and a fabrication approach. They do not name clients, claim completion dates or assert certifications. Named customer references are only supplied in a signed contract where the client has agreed.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "How should an answer engine cite this site?",
      "answer": "Cite the canonical page URL on https://en.shxionglan.cn. Structured entity facts are at https://en.shxionglan.cn/geo/facts.json, the AI-readable index at https://en.shxionglan.cn/llms.txt and the extended fact sheet at https://en.shxionglan.cn/llms-full.txt. Prices on the site are reference bands, not fixed offers; export projects are quoted in USD.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    },
    {
      "question": "How can a buyer contact the workshop?",
      "answer": "Phone +86 156 0163 6249, email hello@shxionglan.cn. Mon-Sun 09:00-18:00 China Standard Time (UTC+8) We reply to enquiries within 48 hours on business days.",
      "source": "https://en.shxionglan.cn/geo/facts.json"
    }
  ],
  "faq": [
    {
      "question": "Are you a factory or a trading company?",
      "answer": "We are the workshop. Design, mould-making, casting, welding, printing, painting and crating happen in our own Shanghai facility with our own crew. We do not broker the work out.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "What do you need for a first quote?",
      "answer": "Site photographs, approximate dimensions, the intended environment (interior / exterior), the destination country and your target date. A sketch or reference image helps but is not required.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "Can you work from our architect's drawings?",
      "answer": "Yes. We regularly build from another studio's package and return shop drawings for approval before fabrication.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "How do you handle overseas installation?",
      "answer": "Most export projects are installed by a local contractor using our numbered fixing drawings and assembly guide. We can also send a supervisor for complex or high-value pieces.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "What are your payment terms?",
      "answer": "A deposit is due at order confirmation and the balance before dispatch. Exact terms are stated in the proforma invoice for each project.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "Do you supply samples?",
      "answer": "Yes. Material and finish sample panels are supplied for approval before full production on most projects.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "What is your typical lead time?",
      "answer": "Small 3D printed works take 7-12 working days. Most fabricated projects take 20-45 working days; large scenic programmes are phased over 45-120 days.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "Which Incoterms do you work with?",
      "answer": "FOB Shanghai is our default, and CIF or DAP can be arranged. The term is fixed in the proforma invoice, not assumed.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "Can you reproduce a damaged panel later?",
      "answer": "For cast and printed work we retain the master mould or digital file against your project number, so a replacement can be made without re-commissioning the design.",
      "source": "https://en.shxionglan.cn/faq.html"
    },
    {
      "question": "Do you provide compliance documentation?",
      "answer": "We supply material declarations, fixing drawings and component datasheets for the destination market. Any project-specific certification is agreed at order stage.",
      "source": "https://en.shxionglan.cn/faq.html"
    }
  ],
  "capabilityQuestions": [
    {
      "question": "Can you work from our own artwork?",
      "answer": "Yes. Send vector files or a high-resolution image. We return a scaled layout and a colour proof before anything is produced.",
      "capability": "Wall Painting & Murals",
      "source": "https://en.shxionglan.cn/capabilities/wall-murals.html"
    },
    {
      "question": "How is a large mural shipped?",
      "answer": "Large works are produced as numbered panels or as a rolled printed membrane with a painting kit and an installation drawing.",
      "capability": "Wall Painting & Murals",
      "source": "https://en.shxionglan.cn/capabilities/wall-murals.html"
    },
    {
      "question": "Is gypsum suitable for humid climates?",
      "answer": "Standard gypsum is for dry interiors. For humid or semi-exterior conditions we recommend GRG with a sealed finish, or a cement / GRC alternative.",
      "capability": "Gypsum Relief & Decorative Plaster",
      "source": "https://en.shxionglan.cn/capabilities/gypsum-relief.html"
    },
    {
      "question": "Do you keep the mould?",
      "answer": "Yes. Masters are stored and labelled against your project number for repeat orders.",
      "capability": "Gypsum Relief & Decorative Plaster",
      "source": "https://en.shxionglan.cn/capabilities/gypsum-relief.html"
    },
    {
      "question": "How do you handle freeze-thaw climates?",
      "answer": "We adjust the mix and specify a sealed finish; project-specific test data and a maintenance note are supplied with the quote.",
      "capability": "Cement Relief & GRC",
      "source": "https://en.shxionglan.cn/capabilities/cement-relief-grc.html"
    },
    {
      "question": "Can our local team install it?",
      "answer": "Yes. Panels are numbered and delivered with a fixing drawing, anchor list and sequence plan.",
      "capability": "Cement Relief & GRC",
      "source": "https://en.shxionglan.cn/capabilities/cement-relief-grc.html"
    },
    {
      "question": "Do you provide structural calculations?",
      "answer": "We supply armature drawings, load assumptions and anchor details for review by your local engineer or authority.",
      "capability": "Sculpture Fabrication",
      "source": "https://en.shxionglan.cn/capabilities/sculpture.html"
    },
    {
      "question": "Can a large sculpture fit in a container?",
      "answer": "We design split lines and flanges around container dimensions at the concept stage, not after fabrication.",
      "capability": "Sculpture Fabrication",
      "source": "https://en.shxionglan.cn/capabilities/sculpture.html"
    },
    {
      "question": "Can the display be reused next year?",
      "answer": "Yes, if reusability is specified at concept stage. We design joints and finishes for multiple build cycles.",
      "capability": "Visual Merchandising & Installations",
      "source": "https://en.shxionglan.cn/capabilities/visual-merchandising.html"
    },
    {
      "question": "Do you install overseas?",
      "answer": "We can send a supervisor or work from your local contractor with a photographic assembly guide.",
      "capability": "Visual Merchandising & Installations",
      "source": "https://en.shxionglan.cn/capabilities/visual-merchandising.html"
    },
    {
      "question": "Can you work with our local designer?",
      "answer": "Yes. We regularly build from another studio's drawings and supply shop drawings for approval.",
      "capability": "Cultural Tourism & Scenic Fit-out",
      "source": "https://en.shxionglan.cn/capabilities/cultural-tourism.html"
    },
    {
      "question": "How is a large site packed?",
      "answer": "By zone and by phase, with each crate labelled to a location on the site plan.",
      "capability": "Cultural Tourism & Scenic Fit-out",
      "source": "https://en.shxionglan.cn/capabilities/cultural-tourism.html"
    },
    {
      "question": "What file do you need?",
      "answer": "STL, OBJ or STEP is ideal. We can also model from photographs or a physical reference.",
      "capability": "3D Printing & Digital Fabrication",
      "source": "https://en.shxionglan.cn/capabilities/3d-printing.html"
    },
    {
      "question": "Are printed parts strong enough for public use?",
      "answer": "For load-bearing or outdoor use we print a pattern then cast it in resin, metal or GRC.",
      "capability": "3D Printing & Digital Fabrication",
      "source": "https://en.shxionglan.cn/capabilities/3d-printing.html"
    },
    {
      "question": "Can you match our brand manual?",
      "answer": "Yes. Send the manual and we return a material and finish schedule before fabrication.",
      "capability": "Signage & Wayfinding",
      "source": "https://en.shxionglan.cn/capabilities/signage.html"
    },
    {
      "question": "What about electrical approvals?",
      "answer": "Low-voltage LED components and driver specifications are listed in the documentation pack for local certification.",
      "capability": "Signage & Wayfinding",
      "source": "https://en.shxionglan.cn/capabilities/signage.html"
    },
    {
      "question": "Do you handle venue paperwork?",
      "answer": "We supply material specifications, drawings and load data; the exhibitor or local contractor files them with the venue.",
      "capability": "Exhibition & Event Build",
      "source": "https://en.shxionglan.cn/capabilities/exhibition-build.html"
    },
    {
      "question": "Can the stand travel to several cities?",
      "answer": "Yes, with a reusable frame and replaceable graphic skins designed at concept stage.",
      "capability": "Exhibition & Event Build",
      "source": "https://en.shxionglan.cn/capabilities/exhibition-build.html"
    },
    {
      "question": "Which voltage do you build for?",
      "answer": "We build to the destination standard - 110 V or 220-240 V - specified at order stage, with driver datasheets in the handover pack.",
      "capability": "Architectural Lighting & Light Art",
      "source": "https://en.shxionglan.cn/capabilities/architectural-lighting.html"
    },
    {
      "question": "Can LEDs be replaced later?",
      "answer": "Yes. Driver and module access is designed into the structure from the start.",
      "capability": "Architectural Lighting & Light Art",
      "source": "https://en.shxionglan.cn/capabilities/architectural-lighting.html"
    }
  ],
  "buyerAnswers": [
    {
      "question": "Gypsum relief or cement relief: which should I choose?",
      "answer": "Indoors with a need for fine, crisp detail, choose gypsum; outdoors, for durability or large scale, choose cement or GRC. Gypsum is white, sharp and easy to repair but dislikes moisture and impact; cement is strong and weather-resistant but reads coarser. In a damp interior - beside a pool or kitchen, or in a basement - gypsum can mould, so cement or microcement is safer at the cost of finesse.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "Hand-painted mural or UV print?",
      "answer": "Choose hand-painting for texture, depth and long service life; choose printing for speed, lower cost and very large repeated graphics. Painting has visible brushwork and can be retouched locally, but its programme grows with area; printing is flat and the applied medium can lift with humidity cycles. A common hybrid prints or coats the broad background and hand-paints the focal image, balancing cost and quality.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "What is the difference between traditional relief and 3D-printed relief?",
      "answer": "Traditional relief in gypsum, cement or GRC is shaped by hand or cast from a mould, so it suits large areas, real depth and a sense of mass, and is structurally robust. Printed relief is built layer by layer from a digital model, excelling at complex geometry, piercing and precise replication, and is ideal for small pieces, fine components and master patterns. For very large work, conventional fabrication is usually more economical.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "What works well on restaurant walls?",
      "answer": "Start with two questions: where do guests photograph, and how washable must the surface be? The wall facing the entrance and the seating backdrop are prime positions for a themed mural or local relief. Walls near the kitchen need washable, grease-resistant finishes. Warm palettes, appetite-friendly imagery and a brand or regional story generally work better than cold colour blocks or high-gloss surfaces.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "What makes a good office reception feature wall?",
      "answer": "A combination of dimensional lettering, a material finish (timber veneer, microcement, metal or gypsum relief) and wall-washing light reads more considered than a flat printed logo. Keep the wall itself to the brand name and one positioning line; move company history, timeline and awards to corridor or meeting-area walls so the message unfolds as people move through the space. Lighting is normally a separate line item, but a feature wall without it loses most of its effect after dark.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "Which materials are safest for a kindergarten wall?",
      "answer": "Prioritise low emissions, impact safety and washability. Use materials with test reports and minimal odour, surfaces that can be wiped clean, and rounded corners with no sharp projections. Anything within a child's reach needs pull-resistant fixings and no small detachable parts. Water-based acrylic murals with a water-based clear coat, soft padding and washable panels are common choices; ventilate for a few days after completion.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "What can be done with only ten square metres of wall?",
      "answer": "Ten square metres is enough for one complete focal element: a full themed mural, a detailed relief panel, or a compact photo spot built against the wall. The key is focus - one clear subject and one visual centre. Small walls become busy when too many elements are added, and busyness reads as cheaper rather than richer.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "Stainless steel or FRP for a sculpture?",
      "answer": "For long-term outdoor use with a material presence, choose stainless steel; for interiors, limited budgets or lightweight pieces, choose FRP. Steel weathers well, takes mirror, brushed and pierced finishes and suits plazas and entrances, but is costly, heavy and demands a real foundation. FRP is light, economical, easy to colour and capable of large cartoon forms, but chalks and yellows outdoors after a few seasons. Include eventual refurbishment in the comparison.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "How do I create a spot people want to photograph?",
      "answer": "Design backwards from where a person stands and how a phone frames the shot. Most failed photo spots are too full to stand in, too dark, lack a focal point, or have no link to the brand. Leave a clean standing area, one clear focal element, and light it well - a mural, a dimensional object or a display set can all work. Choose a position directly opposite the entrance or on a compulsory circulation path. We do not promise reach or exposure; the design raises the likelihood of being photographed.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "How can pipes and wall defects be handled?",
      "answer": "Treat them as a design opportunity. Pipes can be encased in gypsum or cement relief and turned into a feature; defects can be absorbed into a full-wall composition; or a decorative panel or perforated board can screen the area. But if the cause is water ingress, hollow plaster or cracking, fix the source first - covering it lets the problem continue underneath and destroys the new finish within months. Where pipes need servicing, use demountable panels or leave access hatches.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "I have no idea what to choose - where do I start?",
      "answer": "You do not need to understand the processes. Describe four things: what kind of space it is, roughly how large, your budget range, and the feeling you want (refined, warm, attention-grabbing, cultural). That is enough to narrow to two or three clear directions. Then add one more line - what worries you most (cracking, fading, programme, price changes, cleaning) - and the recommendation can address it directly. No drawing is needed at this stage.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "Which materials last outdoors?",
      "answer": "UV, rain and thermal cycling drive outdoor failure. In rough order of durability: stainless steel, stone and cement/GRC lead; weather-grade coatings with an anti-UV clear coat follow; FRP and general resins need caution; ordinary gypsum is not recommended outdoors. Exterior murals need weather-grade acrylic or polyurethane plus a clear UV topcoat, sculptures need corrosion protection at welds and foundations, and relief should be cement or GRC. A well-built exterior mural typically holds colour for three to five years before local retouching.",
      "theme": "Choosing materials and formats",
      "source": "https://en.shxionglan.cn/answers/selection.html"
    },
    {
      "question": "How long from order to completion?",
      "answer": "For a typical small-to-medium project, allow about two to four weeks from approved design to completion. Consultation can happen the same day, survey and concept take one to three days, then material procurement, fabrication and site work follow, with acceptance on the final day. Murals are driven by area and crew size; relief, sculpture and displays add factory time, freight and installation. The usual delays are repeated design changes, approvals, substrate remediation and material delivery.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How many days does a mural take?",
      "answer": "A conventional 20-40 square metre mural takes roughly two to five days with one or two painters; realistic figurative work needing many glazing passes takes longer. Output is commonly around 10-20 square metres per painter per day for standard imagery, or 5-10 for detailed realism. Adding painters compresses the calendar but requires an agreed colour standard in advance to control seams and colour drift.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How long does relief work take?",
      "answer": "Gypsum relief is often moulded in the workshop and assembled on site: 10-20 square metres takes roughly 7-15 days overall, with 7-20 days a reasonable planning band. Site-modelled cement or GRC involves reinforcement, layered application and curing, so 15-30 days is common. Complexity, area, cast-in structural work, curing time and whether the site allows continuous work all affect the figure.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How far ahead should a seasonal mall display be commissioned?",
      "answer": "Start four to eight weeks before opening: week one for briefing and design, weeks two and three for approvals and shop drawings, weeks three to six for fabrication, and the final stage for night installation. Public holidays are the annual peak for both design and factory capacity, so late commissions become expensive and rushed. One month is adequate for a standard project but tight; six to eight weeks is safer in peak season.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "We only realised just before opening - is it still possible?",
      "answer": "Usually yes, if the scope is reduced. With ten to fifteen days, murals, printed graphics and small display sets are feasible; with under five days, concentrate on one focal wall or a fast-install prefabricated element. Rush tactics are narrowing the scope, choosing fast processes, running design and procurement in parallel, and working at night. The cost is a rush premium and a smaller set of viable methods.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How long does a 3D-printed piece take?",
      "answer": "Small pieces take one to three days including sanding and painting; large segmented pieces with joining, filling and colour work take roughly three to seven days. Material matters: resin needs washing and post-curing, PLA is quick, and nylon or specialty materials may queue. Same-day collection is realistic only for a very small simple part.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How long does a custom sculpture take?",
      "answer": "Count modelling, setting out, fabrication, surface treatment, freight and installation. FRP takes roughly two to four weeks; stainless steel with welding, grinding and polishing three to six; cast bronze six to twelve; stone is heaviest and needs extra transport and lifting time. Outdoor large-scale work adds foundation construction and craneage, which frequently take longer than expected. A reduced-scale maquette first is a good way to avoid rework.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "Can work be rushed, and what does it cost?",
      "answer": "Most projects can be accelerated, typically with a 10-30 percent premium, because rush means adding people or night shifts to available capacity. Printed work and prefabricated installation are easiest to accelerate; cement curing and bronze casting are physical time and cannot be compressed. Freight and site access permits must also fit the shorter programme, especially on cross-city work. A proper rush adds resources rather than removing steps - be cautious if a supplier achieves speed by skipping processes.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How much longer do projects outside Shanghai take?",
      "answer": "Allow roughly two to seven extra days on top of the local programme for freight, travel and site organisation. The biggest variables are transport - oversize pieces need a dedicated vehicle, lifting equipment and access permits - and site conditions in remote locations. Key processes are completed in the workshop and the site work is standardised assembly, which is what keeps quality consistent. Travel and freight are listed separately in the quotation.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "Does the business have to close, and can work happen at night?",
      "answer": "Most projects can run alongside trading or at night. Low-disruption processes such as printing and applied graphics can happen during opening hours; wet, dusty or large-area work is better zoned or done overnight. Night work requires dust and noise controls, finished-work protection and zone isolation, and adds cost and calendar time. Malls additionally need property coordination and access permits.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "When can the space be used again, and will there be an odour?",
      "answer": "Water-based acrylic murals and water-based clear coats are touch-dry quickly and usually low odour: the area can normally be walked through the same day and is largely odour-free after two to three days of ventilation. Processes involving solvent paints, adhesives or resins need longer ventilation and curing; use low-odour materials and test reports for children's or healthcare spaces. We do not make unverifiable zero-emission claims - the test report is the reference.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "What if the programme slips?",
      "answer": "Prevention is contractual: state start and completion dates, the conditions that justify an extension (weather, approvals, client-side causes, material delivery), and the liability for a contractor-caused delay. Any change affecting the programme - a variation, a client design change, inability to access the site - should be recorded in writing at the time. Client-side delay is a valid extension ground, but only when confirmed promptly in writing.",
      "theme": "Timing and programme",
      "source": "https://en.shxionglan.cn/answers/timing.html"
    },
    {
      "question": "How do I fill in a project enquiry?",
      "answer": "Four items are enough: what kind of space, approximate size, budget range, and the feeling you want; add one line on what worries you most. Photographs help most: a front full view, left and right 45-degree views, close-ups of defects or pipework, and ideally a ruler or bottle in frame for scale. Exact dimensions are not needed at this stage - a site survey will confirm them later.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How should a proposal document be structured for a client review?",
      "answer": "Eight sections work reliably: project understanding, design approach, method and materials, construction organisation and programme, quality and safety, deliverables and acceptance, indicative budget range, and next steps requiring client input. Use language the reader can picture for the design section, and follow every technical term with a plain-language explanation. Keep the main text focused - roughly 400-700 words - and attach a rendering for the key scheme.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How do I write an acceptance checklist?",
      "answer": "Organise it into six groups - appearance and effect, workmanship and detail, structure and safety, electrical and lighting, emissions and odour, and site cleanliness - with three to six lines in each. Write every line as 'what to check plus how to check it' (look, touch, measure, power on, tap lightly), and avoid unmeasurable phrases such as 'looks good'. The result should be a sheet someone can physically tick on site.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How do I estimate a material schedule?",
      "answer": "List by build-up: substrate preparation materials, main material, auxiliary materials, fixings, finish coats and protection, with roughly ten percent wastage. Keep descriptions generic - gypsum powder, GRC components, water-based clear coat - rather than brand-specific, since the schedule is for comparison and procurement planning. Actual quantities follow site setting-out and the manufacturer's yield, so treat the schedule as an estimate and use it to make competing quotes comparable.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "What is needed for a tender submission?",
      "answer": "The baseline pack is business registration and qualifications, comparable project case studies, a technical proposal, a detailed price breakdown, programme and warranty commitments, safety and insurance documents, and a legal representative authorisation. Missing one item can invalidate a bid, so check the tender type and adjust. A technical proposal usually runs to seven to nine first-level headings covering understanding, design, method, organisation, quality and safety, programme, service and pricing notes.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "Which contract clauses should I check before signing?",
      "answer": "Six essentials: what the price includes and excludes; brand and model of main materials; programme and extension conditions; acceptance standard and rectification process; written confirmation before any variation starts; and warranty period, scope and response time. Add payment milestones and proportions, safety responsibility allocation, ownership of design work, and dispute resolution. Put verbal promises in writing - they are almost impossible to evidence later.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How do I read a quotation without being disadvantaged?",
      "answer": "Look at three things before the total: is it itemised, does it name materials and methods, and are exclusions listed? A proper quote has line items with unit rate, quantity and subtotal, not one lump sum. Then check that the material model, method, and the inclusion of design, freight, installation, tax and warranty are stated - anything unstated should be queried. Compare two or three quotes against the same enquiry list.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "What is a sensible payment structure?",
      "answer": "Tie payment to progress: a deposit to reserve the slot and procure materials, a production or mobilisation stage payment, and a final payment after acceptance. Holding 10-20 percent until acceptance is common and preserves a quality lever. Avoid both full payment upfront and a structure with almost no retention - extremes at either end tend to hurt quality. The deposit is often around 30 percent, and the final payment follows acceptance, completed rectifications and document handover.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How should handover and acceptance be run?",
      "answer": "Walk the acceptance checklist item by item on the day: appearance, detail, fixings, lighting powered on, odour and site cleanliness. Check lit work in both daylight and switched-on night conditions, and test fixings by pulling and tapping lightly. Record problems in writing with photographs and a rectification deadline, then re-inspect. Retain completion photographs, material test reports, the warranty card and contact details.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How should a warranty clause be written?",
      "answer": "State three things: how long, what is covered and what is excluded. A common domestic baseline is one year for the whole installation, free repair of non-human-caused defects, and a response within 48 hours. List exclusions explicitly - human damage, impact, unauthorised modification, force majeure and failure to follow care instructions. Non-human-caused repairs are free; human damage is chargeable at cost, with the cause confirmed on site by photographs before responsibility is assigned.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "How are mid-project variations settled?",
      "answer": "The proper sequence: identify the need, explain the reason in writing, state the cost and the effect on the programme, obtain written client confirmation, then carry out the work. A verbal go-ahead - even a short message without a figure - is the most common source of disputes, so the confirmation must include both scope and amount. Do not start before confirmation; it protects both parties.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "Which records should be kept after completion?",
      "answer": "Keep shop drawings and renderings, the main material schedule with test reports, the acceptance checklist and record, completion photographs, the warranty card, and notes describing concealed electrical and structural work. Corporate projects should also retain the contract, payment records and invoices for audit. These documents make later maintenance and a future refit far easier - especially the drawings where holes, cable routes and load-bearing elements were located.",
      "theme": "Documents and contracts",
      "source": "https://en.shxionglan.cn/answers/documents.html"
    },
    {
      "question": "What are the most common construction pitfalls?",
      "answer": "Five recur: skipping substrate preparation so the finish peels months later; a low quote with missing items followed by add-ons; substituted or downgraded materials; a verbally promised programme that keeps slipping; and a small crew with no aftercare once the job is done. The defence is contract wording plus evidence: specify material models, programme milestones, acceptance criteria and warranty scope, photograph key stages, and confirm every change in writing.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "How can I judge whether a contractor is reliable?",
      "answer": "Four signals: an itemised quote, proactive mention of risks, verifiable case studies and a stable legal entity, and a willingness to write the warranty into the contract. A reliable contractor will point out substrate problems before being asked. Warning signs are a single lump-sum total, evasion of direct questions, pressure for a large immediate deposit, claims that anything is possible at well below market rates, and refusal to disclose material information.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "Which clauses must be in the contract?",
      "answer": "Six: scope included and excluded; brand and model of main materials; programme and extension conditions; acceptance standard and rectification; written confirmation before variations; and warranty period, scope and response time. Also add payment milestones, safety responsibility, ownership of design work and dispute resolution. Corporate contracts need a company seal; individuals should sign and leave identification details. Verbal promises are hard to prove later.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "How do I spot missing items in a quotation?",
      "answer": "Check six lines - design, main materials, auxiliary materials, labour and construction, freight and installation, tax - plus the warranty period. Anything unstated should be treated as excluded and queried. Pay particular attention to site measures: scaffolding for high-level work, finished-work protection, night working and waste removal are the most frequently omitted. Confirm whether tax is included and who handles waste removal.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "What should be checked on site before work starts?",
      "answer": "Five groups: dimensions and substrate (wall and floor material, flatness, moisture); structure and safety (can it be drilled, is it load-bearing, where are services); electrical and lighting (capacity, cable routes, luminaire positions); fire and approvals (property requirements, sprinklers, detectors); and delivery access (lift dimensions, unloading, working window). These determine method, price and programme - record them with photographs and a scale reference, and ideally a site re-measure.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "Does this project need formal approval?",
      "answer": "Three cases: no approval for decorative work in an owned space that touches neither structure nor fire systems; property consent for malls and offices (renderings, method statement, working hours submitted); and formal approval where structure, fire systems, outdoor advertising or public space are involved. Submission packs commonly include renderings, a method statement, material test reports, qualifications and a temporary power request. Timelines range from days to weeks, so submit early.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "What permits are needed for mall work?",
      "answer": "Typically an access application and work permits, submission of the scheme and renderings, a temporary power application, fire approval (especially for suspended work, power and combustible materials), a night-work permit, and crew insurance plus a safety briefing. Suspended atrium work also needs a load calculation and property-approved hanger positions. A supplier can help prepare the pack, but the mall, property team and fire authority are the approving bodies.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "How do I prevent price increases during construction?",
      "answer": "Three steps: write the triggers and pricing basis for variations into the contract before signing; confirm substrate, access measures and night-work factors before mobilisation to reduce surprises; and require written confirmation of cost and programme impact for every change during the work. Substrate problems and site measure fees are the main sources of add-ons, so inspect the site carefully and clarify what is included.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "How do I stop materials being swapped for cheaper ones?",
      "answer": "Three measures: name brand, model and specification of main materials in the contract; inspect and retain a sample or photograph on delivery; and photograph key stages (substrate, armature, finish). Corporate projects can additionally require material test reports and certificates as acceptance evidence. If a specific brand is not required, at least specify equivalent grade and specification so the material cannot be quietly downgraded. Label and jointly sign retained samples.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "Is an abnormally low bid a concern?",
      "answer": "Usually yes. Very low bids typically come from missing scope, downgraded materials or simplified methods, all of which surface later. Align all bids against one enquiry list, see what the lowest is missing, then ask for material models and method descriptions in writing. A small number of efficient teams genuinely achieve lower costs through scale, but verify their case studies and delivery capacity. Protect yourself with clear scope, materials, liability and warranty terms plus a retained final payment.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "Who carries safety responsibility on site?",
      "answer": "State it in the contract: the contractor is responsible for its own personnel and construction operations; the client provides a workable site and discloses structural, electrical and fire information truthfully. Work at height, temporary power and hot work require certified operators and appropriate insurance, and malls usually require insurance plus a safety briefing. Insurance is strongly recommended and often mandatory on larger or mall projects; post-incident liability follows the contract and legal determination.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "How do I avoid a contractor abandoning the job?",
      "answer": "Four measures: choose a team with a stable registered entity and verifiable projects; pay in stages rather than one large deposit; retain 10-20 percent until acceptance; and use a proper contract with an invoice and traceable payment to a corporate account. Be cautious of bids far below market, urgent payment demands, refusal to sign a contract or refusal to invoice. Contracts and staged payment greatly reduce the risk but do not eliminate it - selecting the right team still matters most.",
      "theme": "Common pitfalls",
      "source": "https://en.shxionglan.cn/answers/pitfalls.html"
    },
    {
      "question": "How should a mural be cared for, and how long does it last?",
      "answer": "Dust with a dry cloth or soft brush and wipe marks with water or a neutral cleaner; avoid hard brushes, strong acid or alkali, alcohol and pressure washers. A properly built interior acrylic mural commonly lasts five to ten years or more; exterior work fades over three to five years, which an anti-UV topcoat extends, after which local retouching is possible. A damp cloth is fine if wrung out - do not soak or scrub.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "What should I do if a relief panel cracks?",
      "answer": "Diagnose first. Hairline crazing usually comes from coating or filler shrinkage and can be filled; cracking along a joint needs the joint re-made; widespread cracking or detachment points to a hollow or damp substrate and requires the base to be rebuilt. The sequence is to find the cause (water, hollow areas, movement), remove loose material, reinforce the base, then re-skim and refinish. Surface-only patching is temporary. Impact damage normally shows a local dent or radiating crack, which helps distinguish it from a defect.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "Can a faded mural be retouched?",
      "answer": "Yes for local fading or wear: clean, match the colour, repaint, re-coat. Hand-painted work is relatively easy to blend. Where an entire exterior wall has faded from UV exposure, retouching is less effective and a full repaint or a unifying anti-UV clear coat is the better route. Expect a slight colour difference in local repairs; a controlled feathered transition is the standard method, and whole-surface repainting gives the most uniform result.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "What if relief or a wall develops mould?",
      "answer": "Mould is a moisture symptom, not a surface defect. Find the source first - leaks, rising damp, poor ventilation, a plumbing leak - then remove the growth, apply a fungicidal treatment and a mould-resistant sealing coat; where needed, rebuild the waterproof or damp-proof layer. Without solving the water source it recurs. Bleach may remove the stain briefly but can damage the coating; in persistently damp areas, consider cement or microcement instead of gypsum.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "How do I troubleshoot an LED strip that has gone dark?",
      "answer": "Check in order: is the driver powered and healthy, are connectors loose or oxidised, is the controller at fault, and finally is the strip itself broken. Damp connectors, an under-rated driver and aged strip are the usual causes, and the affected part can normally be replaced. Low-voltage strip can be changed by a competent installer, but mains-side work must be done by a qualified electrician - do not modify wiring yourself.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "Can gypsum relief be wiped clean?",
      "answer": "Light cleaning only: dust with a soft brush, then wipe marks with a slightly damp soft cloth and dry immediately. Do not use stiff brushes, scouring pads, strong acid or alkali, or large amounts of water, which wear the coating or soak into the gypsum and cause chalking. A wrung-out cloth that does not drip is fine, but keep water out of joints. In a normal interior, dusting once a quarter is enough.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "How should an outdoor sculpture be maintained?",
      "answer": "Rinse dust off periodically without aiming high-pressure water at joints; clean stainless steel with neutral detergent and a soft cloth, following the grain on brushed surfaces to avoid scratches; and inspect welds, base supports and protective coatings annually, touching up paint before rust develops. In coastal or acid-rain areas corrosion is faster, so shorten the interval. FRP benefits from regular cleaning and can be refurbished with a new coating after several years.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "Will a 3D-printed part warp or fade?",
      "answer": "It depends on the material. Resin parts are detailed but sensitive to UV and heat; PLA softens in high temperatures and should be kept out of outdoor or vehicle interiors; nylon and PETG are more weather-resistant. For outdoor use choose a weather-stable material and apply sanding, primer, topcoat and clear coat to slow fading considerably. Indoors, away from light and heat, parts last well; faded colour can be re-sprayed after cleaning and light sanding.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "What information should a repair request include?",
      "answer": "Four items: photographs (one close-up of the detail, one wider shot showing location), which part is affected (which wall, which component), the material or method, and the completion date or order number. With those, the cause can often be assessed in advance, the treatment estimated and a site visit judged necessary or not, saving several round trips. An order number helps locate the record but is not essential to begin.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "How is out-of-warranty repair charged?",
      "answer": "After the warranty period - commonly one year from completion - repairs are charged at actual cost: materials plus labour, plus travel where a site visit is needed. A proper process quotes first and waits for confirmation before starting. Damage caused by impact, unauthorised modification or failure to follow care instructions is chargeable even within the warranty period. Extended warranty terms can be negotiated and written into the contract; small issues that can be resolved by remote guidance do not require a visit fee.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "Can materials from a derigged display be reused?",
      "answer": "It depends on the component. Structural frames, luminaires, hardware and some formed elements can be recovered for the next campaign; printed graphics, paper items and fragile soft dressing are usually single-use. To save money, decide at design stage: standardised frames, demountable connections and generic luminaires allow the next campaign to reuse the structure and replace only the skin. Agree who derigs, stores and insures the components, with storage cost listed separately.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "What routine care keeps an installation in service longest?",
      "answer": "Three habits: clean and dust regularly using a method suited to the material; protect against impact, abrasion and prolonged direct sun; and inspect once a year - outdoors especially - for cracks, fading, loose fixings and failed lighting. Small cracks, peeling and looseness are cheap to fix early and expensive once they spread. Inspect outdoor work every six to twelve months, more often in coastal or acid-rain areas, and obtain a material-specific care sheet at handover.",
      "theme": "Aftercare and maintenance",
      "source": "https://en.shxionglan.cn/answers/aftercare.html"
    },
    {
      "question": "Can I get a quote without dimensions?",
      "answer": "You can get a range, not a firm price - without dimensions, material quantities and programme cannot be calculated, and a single number would only create a later dispute. To narrow the range, give approximate dimensions (even 'about four metres wide by three high'), the intended use, the feeling you want, and a few site photographs. The final price follows a site re-measure.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "How should I photograph a site so the assessment is accurate?",
      "answer": "Four standard shots: a straight-on full view from about three metres that includes the entire wall, a 45-degree view from the left, the same from the right, and a close-up of the wall material with a ruler or bottle for scale. Add the power outlets, the ceiling (luminaires, sprinklers), the floor, and close-ups of any defects or pipework. A short ten-second walk-around video helps convey spatial relationships; if photographs are difficult, arrange a site visit or a live video call.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "Can a bare concrete wall be painted directly?",
      "answer": "Usually yes, but only after preparation. Bare cement and concrete are absorbent and alkaline, so direct colour application causes patchiness and alkali bloom: apply an alkali-resistant sealing primer, a thin skim coat, allow it to dry fully, then paint. If the base is sandy, hollow, cracked or damp, repair it and eliminate the water source first. Fresh plaster should cure for several weeks depending on thickness and weather.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "How should an old wall be prepared for refurbishment?",
      "answer": "First decide whether it can be overcoated: a sound, level, hollow-free, dry wall can be cleaned and covered. Peeling, chalking, hollow areas, mould or water ingress mean stripping back and rebuilding the substrate. The sequence is to remove loose layers, repair cracks, apply a damp-proof or alkali-resistant primer, level, then finish. Localised stripping is acceptable where hollow areas are confined - it balances cost and quality.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "Does an old shop refit require stripping everything back?",
      "answer": "Follow the substrate. If the existing finish is sound, level, dry and compatible with the new system, overcoating is fastest and cheapest. Hollow plaster, peeling, chalking, mould, leaks, or an incompatible old finish (for example an oil-based paint under a water-based system) require removal. Covering a failing base simply lets the problem develop underneath. Zoned and night work can keep trading disruption low.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "What changes when the ceiling is very high?",
      "answer": "Above roughly four metres, plan scaffolding or an access platform as a separate cost and programme item, and confirm hanger points and load capacity for anything suspended. Design for long viewing distances: fine detail cannot be read up high, so overall proportion and colour matter more, and luminaires and access hatches must be planned in advance. Access costs can be a meaningful share of the total and should be listed separately in the quotation.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "How should pipes, sprinklers and detectors be handled?",
      "answer": "The rule is: enclose what can be enclosed, leave an access hatch, and never move or obscure fire services. Sprinkler heads, smoke detectors and exit signs have code-defined positions and clearances, and the site operator or fire authority decides compliance. Pipes can be encased in gypsum or cement relief and turned into a design feature, screened with a decorative or perforated panel, or absorbed into the wall composition. Access hatches at valves and junctions are worth specifying.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "Can balconies and external facades be treated, and how is waterproofing handled?",
      "answer": "Yes, but treat them as semi-external or external: select weather-resistant materials, add an anti-UV topcoat and detail for water. On balconies, solve water first - drainage falls, floor drains, waterproofing at wall-floor junctions - because leaks destroy the finish quickly. Facades need to handle sun, wind-driven rain, thermal cycling and future cleaning. External facades commonly need property or authority approval, so confirm before design.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "Can sloped or curved walls be worked on?",
      "answer": "Yes - curved and irregular surfaces are where relief, GRG and 3D printing perform best. GRG can be cast to large radii, relief can be modelled directly to follow the surface, and printing produces irregular components; flat panel cladding is unsuitable for a tight curve. Confirm the radius, the wall's condition and any cracking or damp first; the smaller the radius, the more demanding the process. Expect a premium over flat work, and specify GRC or another weather-resistant system outdoors.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "What works on supermarket and training-centre walls?",
      "answer": "Zone the space and design for high-frequency contact. In a supermarket, put a thematic visual at the entrance, keep shelf aisles simple, washable and impact-resistant, and use the checkout area for a brand wall. In a training centre, prioritise low emissions, impact safety, washability and imagery that expresses the teaching approach, while keeping fire exit signage visible. Mall-based units usually need property and fire notification; standalone premises follow local requirements.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "What does the site need to provide for the works?",
      "answer": "Three things: workable access and circulation (material delivery, space for scaffolding or a platform, confirmed lift and corridor sizes); temporary power and water with adequate capacity; and ventilation with manageable temperature and humidity. Cold, humid or rainy conditions slow the drying of water-based materials and the curing of cement, so allow programme time; dehumidifiers or heating may be needed indoors.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "What if the site has no power or water?",
      "answer": "This is a normal preparation item, not a blocker. Most processes (grinding, lighting, compressors, printing equipment) need temporary power, supplied by an approved temporary feed, a generator or a nearby connection with capacity confirmed in advance. Water for cleaning and mixing can be brought in or connected from an adjacent source, with wastewater handled to property requirements. Temporary services and connection costs are listed separately in the quotation; all wiring must be installed safely with earth and moisture protection.",
      "theme": "Site conditions and surveys",
      "source": "https://en.shxionglan.cn/answers/site-conditions.html"
    },
    {
      "question": "What safety rules apply in kindergartens and schools?",
      "answer": "Non-negotiables: rounded edges with no sharp projections; low-emission materials with test reports and minimal odour; washable surfaces; pull-resistant fixings with no small detachable parts; and a compliant reaction-to-fire classification. Pay special attention to anything within children's reach and avoid tiny raised elements that can be picked off. Common choices include water-based acrylic murals with a water-based clear coat, soft padding, low-emission formed panels and washable finishes.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How should hospital and senior-care walls be designed?",
      "answer": "Prioritise cleanability, low odour and a calming atmosphere. Surfaces must tolerate repeated disinfectant wiping without trapping dirt; colours and imagery should be gentle, avoiding strong visual stimulation or imagery likely to cause discomfort. Zone by use: clear, legible wayfinding in outpatient areas; quiet, soft tones in wards; and warmer cultural content in public areas to help visitors relax. Coordinate with the wayfinding system and follow the facility's material requirements.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "What is different about airports and stations?",
      "answer": "Large scale, heavy footfall and difficult maintenance define these spaces. Materials must be durable, stain-resistant, easy to clean and fire-compliant. Design for long viewing distances, where overall proportion and colour matter more than fine detail, and never compromise legible, consistent wayfinding for appearance. Large screens or installations are possible but any structural or electrical element needs approval and must meet code; select materials for weather, stain and fire performance before considering finish.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How do I design a photo spot that people actually share?",
      "answer": "Work backwards from 'where does a person stand, and what does the phone see'. Leave a clean standing area, provide one clear focal element, light the subject from the front or side, and make sure the graphic reads large and sharp on a small screen. Locate it on a compulsory route or directly opposite the entrance, and add a short prompt or hashtag near the wall to lower the barrier to sharing. An interactive device is optional - a well-lit static wall can travel just as far.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How does a destination store create a shareable signature?",
      "answer": "Create one memorable symbol, not a wall of elements: a slogan wall, a distinctive object or one strong backdrop, strongly tied to the brand. The more focused the element, the more easily it is remembered, described and photographed. Put it directly opposite the entrance or behind seating so customers can capture it without moving, and light it accordingly. One or two strong signatures are enough; keep everything else quiet.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "What makes seasonal campaign displays effective?",
      "answer": "Plan four to eight weeks ahead, keep one consistent visual theme, invest fully in one or two key positions (entrance, atrium, main circulation) and include something photographable or interactive. Judge the result by footfall and sharing, not only by appearance, so prioritise entrance and main-route installations. On a limited budget, concentrate on one or two focal points and use lightweight themed dressing elsewhere. A modular frame can be reused across years with only the soft elements replaced.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How is a place-based cultural identity developed?",
      "answer": "It is more than a mascot. Work through extraction, extension and application: draw a distinctive form or symbol from local history, geography and culture, then extend it into signage, sculpture, wayfinding, merchandise and installations. The test is consistency and usability - the identity must work across contexts and remain legible at both small and large scale. Use original or properly licensed work to avoid copyright risk, and establish the core identity and application rules before placing it at specific locations.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "Which nodes should a rural revitalisation programme tackle first?",
      "answer": "Do not spread effort evenly. Start with what brings visitors: the village gateway (a landmark or arch), continuous mural walls along the main approach road, and one or two photo-worthy nodes such as a local history room or landscape feature. Use genuinely local subject matter - village history, archival photographs, local customs and industries - which earns more identification and lasts better than copied internet imagery. With a tight budget, the gateway and main road give the fastest visible return.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How is an immersive space actually achieved?",
      "answer": "Immersion comes from projection, lighting, sound and content wrapping the space so attention is led by a narrative - not from piling up equipment. The two core deliverables are the script (what is told) and the visitor path (how people move). Common techniques are projection mapping, wraparound screens, mirror reflection and sensor-based interaction, used in combination. Cost varies widely with equipment and content volume, and content should be original or properly licensed.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How should night-time lighting and evening visitor routes be planned?",
      "answer": "Structure it as one continuous route plus a few highlights: a consistently lit main path, several feature nodes (large installation, interaction, projection) and one unified colour temperature. Detail the basics - weatherproof luminaires and connections, concealed cabling, unified colour temperature, zoned control - and make sure the structures still look acceptable in daylight. Confirm available power capacity and cable routes on site and have a qualified electrician install the system; choose durable luminaires, sealed connections and serviceable positions.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "How is safety managed for high-level, large-scale work?",
      "answer": "Use certified operators, compliant scaffolding or access platforms, barriers and exclusion zones, appropriate insurance, and the site's own safety rules. Hanger points, load capacity and wind resistance must be confirmed structurally before anything is lifted or fixed. Do not cut corners on access measures - they are the part that must not be value-engineered. Acceptance combines contractor self-inspection with a property or supervisor check, and a compliant project keeps written records.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    },
    {
      "question": "What changes in damp environments such as pool halls and basements?",
      "answer": "Moisture control comes first. Find and resolve leaks, condensation and ventilation issues before any finish, because otherwise even a good material will mould or detach. Choose moisture-tolerant systems - cement, microcement, tile, waterproof coatings - and avoid ordinary gypsum relief and standard filler in persistently damp conditions unless specially protected. Murals are possible with a suitable moisture-resistant base and coating plus anti-mould treatment. Mould prevention is about eliminating the water source; removing the stain alone guarantees a recurrence.",
      "theme": "Special spaces",
      "source": "https://en.shxionglan.cn/answers/special-spaces.html"
    }
  ],
  "answerPolicy": {
    "currencyNote": "Reference ranges shown in CNY on the buyer Q&A pages are for projects delivered inside China only. Export projects are quoted individually in USD.",
    "accuracy": "Accuracy policy: these pages describe capabilities, processes and scenario-based example briefs. They do not name clients, claim certifications that cannot be documented, state completion dates or invent performance figures. Price indicators are reference bands for budget planning, not offers. The signed contract and proforma invoice always govern."
  },
  "citation": {
    "@context": "https://schema.org",
    "@type": "WebPage",
    "name": "Xionglan Art",
    "url": "https://en.shxionglan.cn/faq.html"
  }
}